Main Page
The ACO 75th Anniversary History Wiki
Welcome to the ACO History Wiki, which is launched in ACO's anniversary year.
The Wiki contains exciting stories about ACO. The history of the company's founding and its early years, locations and subsidiaries, products and services, employees, customers and suppliers, working life and the Ahlmann family of entrepreneurs – these are all topics that are presented in pictures covering the many years of the company’s history. Interesting correlations become clear, insights possible, and also amusing facts come to light. Here you can find out everything about how the globally-active world-market leader in drainage technology, gradually developed from small regional beginnings in Büdelsdorf in Schleswig-Holstein.
The Wiki is an ongoing project that is constantly being expanded. By the 75th anniversary of the company's founding in December 2021, the first decades of the company's history is researched and documented. In the coming months, more stories and tales from and about Aco will be presented here.
You are welcome to contribute to this project. Do you have pictures or documents on any aspect of ACO’s history? Can you think of any stories that are "typically ACO"? We look forward to your contributions. Contact us at: info@history.aco ! (as of December 2021)
The history of ACO
ACO - Foundation and first years 1946 to 1949
ACO's origin: the Carlshütte
ACO is a spin-off from the venerable Carlshütte foundry, which is steeped in tradition, and was established in 1827 – almost 200 years ago – in Büdelsdorf near Rendsburg in Schleswig-Holstein. The Carlshütte was the very first industrial enterprise on the Jutland peninsula and, above all, the first ironworks in the whole of Denmark. The founder was the merchant Markus Hartwig Holler. He ran a flourishing timber business in Rendsburg, but wanted to build an iron foundry in Büdelsdorf.
Holler was completely in tune with the times. He recognized the importance of iron as a material for the new industrial era. In a petition to the Danish King Frederick VI, he meaningfully states:
"It is the word “iron” that explains everything".
He goes on to write that iron is "equally useful, indeed indispensable, for the state and national defence, as it is for households, farmers, trades, buildings and factories. After a visit by the Danish King Frederick VI in June 1829, the King was so impressed by Holler's work, that on his return trip he issued instructions to make Holler a Knight of the Order of Dannebrog. In the picture on the right, Holler's chest shows the medal of the Order of Dannebrog, which is still awarded today as an order of merit for civil and military service to loyal servants of the Danish state, and for special merits in the arts, sciences or economic life.
The Danish king's governor of the duchies of Schleswig and Holstein, Carl von Hessen, supported the venture from the beginning. In gratitude, Holler named the ironworks "Carlshütte" after him. The Landgrave, who was already over 80 years old at the time of the company's foundation, was descended on his mother's side from the English royal house of Hannover, and was the father-in-law of the Danish King Frederick VI. Carl von Hessen was the great-great-great-grandfather of the recently deceased Prince Philip, Duke of Edinburgh, Prince Consort of the British Queen Elizabeth II, who in 2006 presented ACO with "The Queen's Award for Enterprise".
Thus, the circle closes.
Carl was influenced by the ideas of the Enlightenment. He was interested in culture and science. He studied metallurgy and metal casting. He had a particular soft spot for alchemy. Thus, until the end of his life, he endeavoured to extract gold from an alloy of base metals. This passion could also have been a motive for his support of the Carlshütte. Irrespective of this, however, Carl von Hessen was regarded as an avid promoter of business and new industrial ventures.
Carl von Hessen, governor of the duchies of Schleswig and Holstein, and promoter of the Carlshütte.
Frederick VI, the King of Denmark, also supported the Carlshütte, the first ironworks of the Danish state.
The second patron and protector of the Carlshütte was the Danish King, Frederick VI. Like his governor, Carl von Hessen, he was fond of science and business. He was quickly convinced by Markus Hartwig Holler's ideas. At an audience in Rendsburg, Holler was able to present the plans for establishing the foundry in person. The king even visited the foundry construction site.
Over the next ten years, Frederick VI visited the Carlshütte again and again. As in 1829 for example, when Holler was able to report on the first tapping of the smelting furnace. In 1831, Frederick VI visited the blast furnace construction site, and he was back in Rendsburg again in 1835. The king's fifth and last visit took place in 1839: the Carlshütte was in full swing, and Holler was able to present the king with a steam engine that was built there. The founder did not forget that the economic upswing was due in no small part to a number of privileges granted by the monarch. These included the duty-free import of raw materials, the duty-free export of iron goods, and protective tariffs against foreign products.
However, the blast furnace only worked for a few years. The production of iron from bog iron ore, which occurs in Schleswig-Holstein in readily usable quantities, proved unprofitable, so smelting was abandoned, and the company switched exclusively to foundry operations.
The Carlshütte produced cast-iron utensils and objects for the household, road construction, agriculture and shipbuilding. Fascinatingly, the Carlshütte had products in its range that ACO also manufactures today, albeit with different materials. These are window frames, cribs and troughs, and animal pens, also sewer and manhole covers, light oil separators, gutters with cover grates, and finally, sanitary items such as bathtubs and cast-iron water closets.
The Carlshütte around 1915. At the level of the sailing ship at the bottom right, one can see the foundry road leading away to the left.
Extract from a Carlshütte sample catalogue for sewer castings, late 1920s.
Gutter covers and channels produced by the Carlshütte.
The Ahlmann family at the Carlshütte
The Ahlmann family was to play a key role in the development of the Carlshütte, and in the founding of ACO. The German-Danish merchant and entrepreneurial family Ahlmann has been resident in Denmark and in the duchies of Schleswig and Holstein since the 16th century. Thomas Jörgen Ahlmann, the great-great-grandfather of Hans-Julius Ahlmann, established the first connection with the Carlshütte in 1840. He went into business with Holler, and set up a commission warehouse for the Carlshütte's goods in Fredericia, Denmark. From here, Carlshütte products were distributed to the Scandinavian countries. At the time, there were no agents, but instead, wholesalers who were trusted partners.
"Ahlmann & Co" was the name of a distillery and brewery in Fredericia run by Thomas Jörgen Ahlmann since 1842. The distillery was later sold to De Danske Spritfabrikker.
Advertising mark of "Ohlsen & Ahlmann", 1905. The company was sold to the Danish trading company Brødrene Dahl a few years later.
Thomas Jörgen Ahlmann gründet 1842 zudem die Brennerei & Brauerei „Ahlmann & Co“. Dieser Firmenname, vor allem das daraus abgeleitete Kürzel „ACO“, wird mehr als hundert Jahre später von besonderer Bedeutung werden.
Thomas' second eldest son, Johannes Ahlmann took over his father's business together with his brother-in-law Dethlef Ohlsen, which then traded as "Ohlsen & Ahlmann" from 1878. In the following year, the two merchants moved the Carlshütte commission warehouse to Copenhagen. Hartwig Peter Holler – the son of the founder of the Carlshütte – was so convinced of Johannes Ahlmann's abilities that he offered him the post of commercial director at the Carlshütte, which he accepted in 1883. At this time, the Carlshütte was a public limited company. Over the next few decades, Johannes Ahlmann modernised the company, expanded it, and introduced new products, especially enamelled bathtubs, which made the Carlshütte world-famous. In 1900, more than 1,000 workers were employed in the company. The Copenhagen enterprise was later sold to the large Danish trading company Brødrene Dahl.
In 1907, Johannes Ahlmann's son Julius joined the Carlshütte. Julius succeeded his father as commercial director in 1919, and continued the successful modernisation course. However, he died of a serious illness in 1931. His widow Käte Ahlmann was determined to preserve the company's heritage for the next generation. In 1937, she succeeded in acquiring all the shares for the family, and transformed the public limited company into a KG. Käte Ahlmann took over the management of the Carlshütte, which from then on was a family business. In the same year, parts made of asbestos cement were produced for the first time. This gave rise to a concrete division.
- The biography of Käte Ahlmann until 1946 (German version)
The beginnings of the concrete division – use of substitutes for iron
Substitute for cast iron feet for bathtubs at the Carlshütte
The forced conversion of the German economy to war production from the mid-1930s onwards gave rise to manufacturing restrictions in the steel and iron industry: metals were to be saved in the civilian sector so that they could be used for armaments. Central to this was the 1936 Four-Year Plan, with which the economic and military war capability of the German Reich was to be achieved within four years. Within the framework of the Four-Year Plan, the bathtub industry undertook to produce models with a minimum of iron components. From April 1937, the factories were ordered to no longer use cast iron feet for built-in bathtubs. The Carlshütte found a replacement in just a few months: bathtub feet and pedestals were initially made of stoneware, and later in the year they were also made of concrete.
Further savings of iron
On 15 August 1937, the iron and steel supervisory authority ordered a production restriction of 30 percent compared to the production from 1 July 1935 to 30 June 1936 in the entire sanitary and sewer castings sector. This dramatically affected the Carlshütte. Initially, it was possible to fall back on stocks. Thus, from August to December 1937, the Carlshütte recorded only a 17.5 percent decline in sales of foundry products. Asbestos cement panels were used as a substitute for cast-iron underlays for continuous firing furnaces, and these were then also used for the back walls and floors of coal and gas cookers. Iron savings of 20 kg per cooker were achieved with the asbestos cement panels. The Carlshütte annual report of 1937 described the consequences of the manufacturing restrictions and bans: "The sales policy during 1937 was therefore essentially determined by the question of raw material procurement and the use or creation of adequate substitutes."
Cast terrazzo for the wash fountains, fireclay and ceramics for stoves
In 1938, Carlshütte pushed ahead with the use of substitute raw materials. Terrazzo – a mixture of colour-selected aggregates, water, lime and cement – was used as cast terrazzo for the Carlshütte washing fountains, which were previously made of cast iron. For the ovens, fireclay walls were installed in place of the cast-iron walls to save iron. Further savings were achieved by using ceramic ash boxes. New to the Carlshütte range were concrete boiler stoves, which were delivered from March 1938. With the compulsory use of the new materials, which were not characteristic of an iron foundry, a concrete division was set up at the Carlshütte, from which the Severin Ahlmann-Betonindustrie (SAB), later ACO Severin Ahlmann, was established.
Bathtub brochure from 1914: The feet always had to be ordered separately. The cast iron was replaced here from 1937, first by stoneware, then by concrete.
.
The Carola Washing Fountain No. 8 was a successful Carlshütte product in the 1930s. It was made of enamelled cast iron.
The washing fountain in terrazzo design: in December 1937, the cast-iron base was first replaced by stoneware and terrazzo to save iron. Then the fountains were made almost entirely of "marble granules".
Josef-Severin Ahlmann – responsible for the concrete division at the Carlshütte.
The Second World War broke out in 1939. Käte Ahlmann's sons Hans-Julius and Josef-Severin were called up for military service. The factory survived the war largely unscathed. In May 1945, Käte Ahlmann's second-born son Josef-Severin returned from the war. Schleswig-Holstein, including Büdelsdorf, was part of the British occupation zone.
The Carlshütte family business was subject to production restrictions imposed by the military government. However, it was allowed to produce concrete parts for civilian purposes. These were "simple building slabs", agricultural troughs and cement roof tiles.
Josef-Severin immediately took over management tasks in the company on behalf of his mother. He took care of the concrete production at the Carlshütte. At the age of 22, he became department head of the Carlshütte concrete division.
Severin's brother Hans-Julius also returned from captivity at the beginning of 1946. He had already had power of attorney for several years, and was designated by his mother as her successor in the management of the Carlshütte.
On 8 May 1945, Rendsburg and Büdelsdorf were occupied by British troops. The British commandeered Käte Ahlmann's house, and converted it into an officers' mess.
Read more:
- The end of the Second World War in Schleswig-Holstein
- The biography of Josef-Severin Ahlmann until 1946
- The biography of Hans-Julius Ahlmann senior
Establishment of Severin Ahlmann-Betonindustrie (SAB), later ACO
In the course of 1946, Käte Ahlmann, and Hans-Julius and Severin Ahlmann, decide to spin off the concrete division from the Carlshütte as an independent company. The background to this was fear that the Carlshütte would be dismantled by the Allies. On 1 October 1946, the British military government informed the Carlshütte management that the plant was earmarked for dismantling as part of the reparation demands.
The specific reason for the timing of the company establishment before the end of the year was the result of the local elections in Schleswig-Holstein on 13 October 1946, in which the SPD won 41.1 percent of the vote. It was assumed that the Social Democrats would also gain a majority in the state elections scheduled for the following year. The worry was that they would implement expropriation plans. The Social Democrats and the trade unions propagated the expropriation of key industries or companies that were involved in the armaments industry during the Second World War, including the Carlshütte. Käte Ahlmann wrote in a letter on 13 December: "We thought this measure (meaning the company registration) was still the right thing to do in the old year, since one never knows what new prohibitions will come at the end of this year."
In order to secure at least one segment of the business for the family, Josef-Severin Ahlmann registered the company "Severin Ahlmann-Betonindustrie" with the Kiel Chamber of Industry and Commerce on 10 December 1946. SAB, as the company name was abbreviated, later became ACO.
An impressive letter from the Carlshütte works council arguing passionately against the planned dismantling of the company.
It was dated 5 October 1946: which meant that the workforce reacted to protect their Carlshütte just four days after the British plans for dismantling became known.
Read more:
- Denazification in the British Zone (German version)
- The British dismantling policy in the post-war years (German version)
The product range of Severin Ahlmann-Betonindustrie (SAB, later ACO)
It was clear from the company registration letter that the production of new articles was to be started step by step. Three product groups were mentioned: Firstly, building materials for house construction: such as hollow blocks, slabs and lightweight panels, beams and rafters, as well as stair treads. Furthermore, products for civil engineering were also to be manufactured. These included posts, pavement slabs, kerbstones, pipes and cable fittings, driven piles, as well as manhole covers, street drains, cesspits and septic tanks. Finally, it was planned to also produce "non-building materials", meaning products for interior finishing, such as concrete boiler stove jackets and, in particular, terrazzo goods, such as sinks and washbasins.
The articles of the first and second product group were the main priority, explained Severin Ahlmann, because they were "particularly important for the reconstruction of the destroyed cities". In Kiel, for example, 35 percent of all buildings were destroyed, 40 percent were damaged. In the future expansion of labour, more women were to be employed. Production was to be set up accordingly.
The letter concludes with a reference to good order prospects because the Carlshütte intended to successively transfer the entire concrete production to the new Severin Ahlmann-Betonindustrie.
The registration of SAB, later ACO, with the Kiel Chamber of Industry and Commerce on 10 December 1946.
Here Severin Ahlmann lists the planned production programme of Severin Ahlmann- Betonindustrie (SAB, later ACO).
On 17 December 1946, a week after the establishment of the company, Käte Ahlmann wrote to her brother-in-law Hanno Athenstaedt on a letterhead from SAB: "You see the new company on this sheet! May it be lucky! All the permits are there, except for the trade licence from the city of Rendsburg."
The company registration at the Kiel Chamber of Industry and Commerce was processed quickly. The trade registration certificate with the number 891/46 for the trade "concrete industry" – the birth certificate of ACO, so to speak – was issued on 19 December 1946. The retroactive effect to the 10th of the month was noted.
Read more:
- More original documents and letters on the founding of SAB (German version).
Company headquarters in Rendsburg - production facilities in Büdelsdorf
The company's first registered office was not in Büdelsdorf, but Rendsburg. The address was Holsteiner Straße 24, where the Carlshütte kindergarten was also located. Severin Ahlmann later liked to say:"ACO was founded in a kindergarten on an Eider lock." The address – some distance from the Carlshütte – underlines the character of an independent establishment. It was a strategic decision vis-à-vis the authorities.
The production facilities, however, were located on Hüttenweg in Büdelsdorf on the Carlshütte site. Käte Ahlmann leased the site and buildings to SAB.
The first company headquarters at Holsteiner Straße 24 in Rendsburg. Gesa Meyer, the daughter of the first managing director Paul Meyer, was one of the kindergarten children at the time and recalls: "Our father's office was on the ground floor, to the left of the main entrance, and just behind it was Josef-Severin Ahlmann's office, with a wonderful soft, dove-blue carpet."
The Kronwerk lock in Rendsburg linking the Obereider to the Untereider. In the background on the left is the building that was the first headquarters of Severin Ahlmann-Betonindustrie in 1946.
Plan clearly showing - in yellow - the expansion of the young company SAB. Outlined in red is the square that was the subject of the deal with the timber merchant Timm and the town. Yellow is the Severin Ahlmann company, and purple is the company H.F. Timm. The buildings in detail: 1 Pipe pressing plant, 2 Severin Ahlmann storage yard, 3 Severin Ahlmann storage yard, 4 Severin Ahlmann storage yard, 5 Carlshütte residential building, today Vorwerk office, 6 Thormann Hall (built in 1890), 7 Severin Ahlmann office in the Carlshütte, 8 Horse stables (built in its first form around 1784), 9 Director's house, 10 Concrete moulding shop, 11 Sanitary moulding shop, 12 Sanitary polishing shop, 13 Haus & Garden Ahlmann, 14 Coach house (built in 1913), 15 Alte Meierei.
Workforce and products
Carlshütte and SAB were closely connected. Friedrich Sensen, Käte Ahlmann's deputy at the Carlshütte, recommended his brother-in-law Paul Meyer as an authorised signatory and de facto managing director of SAB. Meyer had a decisive influence on the company in the early years at Severin Ahlmann's side. He was instrumental in SAB's success.
At the time of the company's registration, SAB had only eleven employees. Soon the number of employees rose to 100. From the beginning, Severin Ahlmann employed refugees and displaced persons from the former German eastern territories, and the Soviet occupation zone. They became a success factor for the young company.
Water management production factory of Severin Ahlmann-Betonindustrie in Büdelsdorf, with truck and trailer, and the driver Mr Bruhn, 1949.
View of the marble granule polishing shop in factory building VI.
Exhibition room "Glück-Auf" of the Carlshütte with marble granule products of Severin Ahlmann-Betonindustrie (SAB, later ACO).
Mr Biemann and Ms Jechura in the office. The logo of Severin Ahlmann-Betonindustrie (SAB, later ACO) is clearly visible on the window pane.
The warehouse (factory building IV) at SAB. Concrete roof tiles can be seen on the right. For the British Rhine-Army and other British services, Carlshütte produced 42,000 stoves in 1945/46, 40,000 Canada stoves, 40,000 cookers, 100 large cookers, 3,500 bath tubs, 10,000 radiators, 5,000 washing kettles and also 50,000 aluminium roof tiles. Concrete was also used for roof tiles. This production was done on a large scale by SAB. Concrete roof tiles are an important product for SAB. Gerd Ostryga, who started at the Carlshütte on 17 November 1946, and shortly afterwards moved to the new Severin Ahlmann-Betonindustrie (SAB, later ACO), recounts in his memoirs that one of his first tasks was to form concrete roof tiles.
Read more:
- SAB employees recollect the early years (German version)
The first logo of SAB (later ACO)
The first logo of the newly founded Severin Ahlmann-Betonindustrie consisted of a coat of arms with stylised Ahlmann lettering. The coat of arms originally came from Bankhaus Ahlmann in Kiel, and was used by Severin Ahlmann to highlight the long family tradition. The logo was later used as a model for the logos of other Ahlmann companies.
The first logo of Severin Ahlmann-Betonindustrie.
Concrete products of the young SAB featuring the logo.
Work under difficult conditions
The production permit for SAB did not arrive until March 1947. Until then, the permit issued to the Carlshütte was valid.
Production was by no means easy in the post-war period. There were shortages everywhere. This applied to food and everyday items, as well as to raw materials and energy. Parts of the infrastructure were still not repaired. Almost all resources were regulated by the authorities.
At the end of March 1947, the city of Rendsburg allocated SAB a certain amount of electricity: 15,000 kWh per month.
In mid-May 1947, the Rendsburg post office informed Severin Ahlmann that his application for "Permission for unrestricted voice telephony within the British zone" was granted. He had to wait a long time for this: the application had been submitted six months earlier. Severin Ahlmann was able to keep an existing telephone number - 2555. In addition, he was given the opportunity to register for call prioritisation by dialling a specific code number.
The foundation of Ahlmann & Co. in Andernach
On 1 November 1948, Ahlmann & Co. was founded in Andernach, Rhineland-Palatinate. The aim of establishing this company – similar to the establishment of Severin Ahlmann-Betonindustrie two years earlier – was to secure the family and its entrepreneurial activities in view of the uncertain political and economic future. Andernach was located in the French occupation zone. It was hoped that dismantling and expropriation plans would be pursued less intensely here, or not at all. Moreover, Käte Ahlmann, who comes from the Rhineland, had close ties to the region.
Another reason for the Ahlmann family to hedge their bets was the beginning of the "Cold War". The blockade of Berlin by the Soviet Union fuelled the fear of escalation. Andernach, which was further away from the East Zone border, and lay mainly on the other side of the Rhine, appeared to be a "safe fallback location" in case the Red Army advanced to the Rhine.
Purely economic motives also played a role. An iron foundry and an enamelling plant were to be built in Andernach. The product range corresponded to that of the Carlshütte: cast iron tubs, washers and other sanitary castings. The new plant was an extension of the Carlshütte, which was to supply the French and American zones with these products.
The project was approved at the beginning of February. At the end of May 1949, construction work began and progressed rapidly. In the following years, there was an exchange of personnel between Severin Ahlmann-Betonindustrie (SAB) and the newly founded company in the Rhineland. This was accompanied by a fruitful transfer of know-how.
Another important aspect: Ahlmann & Co. later provided the abbreviation for the group's current name: ACO. Josef-Severin Ahlmann later recalled that the business liked to refer to Thomas Jörgen Ahlmann's company Ahlmann & Co. established in Fredericia in 1842.
Read more:
- On the establishment of Ahlmann & Co. in Andernach (German version)
SAB in 1949
Käte Ahlmann was exonerated in the denazification proceedings, the accounts were unblocked, the Carlshütte was not dismantled.
However, a reincorporation of concrete production into the Carlshütte was not an issue. SAB remained an independent company, had made a name for itself, and was growing. In 1949, the turnover was DM 665,000, more than four times the turnover two years earlier. The number of customers doubled in the same period. In 1949 there were 550.
Severin Ahlmann had married in the meantime. His wife Maria Luise, née Guthe, worked in the company. A photo album made by Severin Ahlmann in 1949 gives an insight into the early days of the company.
You can browse through the entire photo album here.
Cover of the photo album compiled by Severin Ahlmann three years after the founding of SAB.
Severin's dedication to his mother Käte Ahlmann. He wrote: "To our mother! 'We don't celebrate anniversaries - we celebrate successes!' We also want to claim this saying for ourselves, and can state with satisfaction that the foundations for the future have been laid. With heartfelt gratitude for entrusting us with this ongoing task. Your Josef-Severin. 24.12.1949"
""Whether stone or cast, when it’s from AHLMANN it will last!" An advertising slogan representing both the Carlshütte and Severin Ahlmann-Betonindustrie (SAB, later ACO).
Severin Ahlmann's involvement in the Carlshütte and SAB (ACO) 1949 to 1956
The business development of SAB (ACO) in the early 1950s
The young SAB developed extremely positively in the early years. At the end of the fourth business year in 1950, the turnover of DM 1,600,000, was ten times that of the first full year in 1947. The customer base had almost quintupled in this short time, to 965. Most of the customers still came from northern Germany, from Schleswig-Holstein and the Hamburg area. However, Severin Ahlmann announced as early as 1951 that the company had "increasingly succeeded in opening up the German markets south of the Elbe."
By 1951, the workforce had grown from the initial eleven employees to around 100, confirming the positive trend.
Whereas at the very beginning, large orders from customers could often not be processed due to the limited production capacities, this situation improved at the beginning of the 1950s. There was major investment: new, modern machines made higher order volumes possible. And if production also had more space to develop, then even more could be made.
In the spring of 1951, the company founder emphasised the "importance of our company in the Rendsburg economic region". The local and state authorities saw it similarly, and supported the young company; this was also because Severin Ahlmann had tailored his production to urgent, very current problems: SAB manufactured the articles needed for reconstruction.
Outdoor storage of products made of heavy concrete on the Eider: in this case, Hofmann spirals. In the background you can see the elms at the rear of the car park, which were still young then, and are now fully grown trees.
A special product of the first SAB years: the so-called Hoffmann separating spiral for domestic sewage treatment plants is cast from concrete.
Securing raw materials - the acquisition of the Mielberg gravel plant
In 1950, SAB secured the future supply of aggregate. This is the term used to describe mineral additives - from sand to gravel – that, when combined with water and cement as a binding agent, produce concrete.
In February 1950, Severin Ahlmann acquired the gravel plant in Mielberg, municipality of Jagel, in Schleswig, from Struve & Weyhe. The purchase included a workshop, a silo, various machines, such as scraper and screening plants, conveyor belts, pumps and electric motors, as well as a range of small equipment. And it also included the production rights. In 1943, Struve & Weyhe had concluded an extraction contract for a plot of land of about three hectares belonging to the Mielberg farmer Johann Gerold. This allowed the company to extract stones, gravel and sand from the ground there.
SAB took over all existing delivery obligations, as well as the employment contracts of those who had been working in the gravel pit before the takeover.
Entrepreneurial activities of the Ahlmanns in the young Federal Republic of Germany
For Severin Ahlmann in the 1950s, however, SAB is "only" one building block in a company complex centred on the Carlshütte.
After the plans to dismantle and expropriate the Carlshütte had been averted, Käte Ahlmann devoted herself to a wealth of new activities. In doing so, the now almost sixty-year-old businesswoman unleashed an enormous amount of energy. Her sons Severin and Hans-Julius were also involved with passion and vision.
To help alleviate the still acute housing shortage, the family founded the "Gemeinnützige Wohnungsgesellschaft A GmbH" in early 1949. In addition to the Carlshütte, Severin's SAB also financed the new company, which primarily created cheap housing for the many displaced persons. In September 1949, the topping-out ceremony for the first construction phase of a housing estate with 36 flats was celebrated.
With the upswing of the Carlshütte, and the good economic development of SAB, the transport volume also increased. As a consequence, Ahlmann-Transport KG was founded in September 1950. The company was entered in the commercial register on 25 October 1950, with Severin Ahlmann as the owner, and his brother Hans-Julius as the authorised signatory. Branches were opened in Hamburg and Bremen. The new company transported goods by truck and rail. It also loaded ships. And what's more: Ahlmann-Transport KG also acted as a shipping company, running scheduled services, and commissioning the construction of ships, which are used in a variety of ways. Friedrich Sensen, Kätes' confidant and the grey eminence of the Carlshütte, played a decisive role as managing director of Ahlmann Transport KG.
There are three main reasons for the investment in ships: the Carlshütte is located far away from its sources of raw materials, and partly also from the areas where its products were sold. A major advantage, however, is its location on the Upper Eider, with access to the Kiel Canal. It also had a history of shipbuilding. A factory-owned shipyard was built on the Eider in 1847, and it had traditionally maintained a number of ships bearing the name "Carlshütte" with consecutive numbers. After the Second World War, the German merchant fleet was destroyed, and was to be rapidly rebuilt by German companies. The creation of new shipping capacities was therefore fiscally subsidised.
The activities of Ahlmann-Transport KG at a glance.
It maintained a fleet of trucks and also acted as a shipping company.
Top left: the flag under which the ships sailed.
.
The COLONIA, a ship in the Ahlmann fleet, passing under the Rendsburg High Bridge.
Truck of the Ahlmann Transport company in the mid-1950s.
An aircraft, truck, ship and train circle the Ahlmann coat-of-arms: cast iron plaque from 1960 marking the 10th anniversary of Ahlmann-Transport KG.
The overseas connections
Further steps in the transport business follow: in April 1951, Translanta GmbH was founded as an independent shipping company. The company was based in Rendsburg.
New ships were also built especially for Translanta: the ocean-going vessels COLONIA and CIANDRA, commissioned in 1952 and 1953.
The ships were equipped with "particularly nicely furnished passenger cabins". The salons designed by Severin with mirrored floors and cowhide rugs, which came from cows on the Ahlmann farm on the Carlshütte that grazed where the "Rondo" is today, caused a sensation. Of course, the bathtubs from the foundry are not missing either – at that time an almost unheard-of luxury on ships of this class.
The COLONIA and CIANDRA sailed on the Ahlmann Trans Caribbean Line from the Great Lakes in Canada to the Caribbean: the first route for German ships between foreign ports in the post-war era.
Severin Ahlmann traveled a lot on business during this time, especially to the USA and Canada. In just two years he flew more than 500 hours. The aim was to catch up with international developments, and to position the name "Ahlmann" worldwide. On the one hand, together with managers from the Carlshütte, he informed himself in detail about the latest developments in the field of foundry technology and the enamelling industry, as well as in mechanical and plant engineering. On the other hand, new sales markets were to be opened up after those in Eastern Europe were lost behind the Iron Curtain.
Just a few years after the end of the war, Carlshütte is once again fully present overseas, as here with a booth at the Great New York State Fair in 1951.
Dishwashing machines were already being developed at Carlshütte in the early 1950s. The idea originated in the USA. For Europe, however, the innovation comes too early - there is not a market for appliances of this kind yet.
In 1951, in the small town of Grand-Mère, in Quebec province in Canada, Severin Ahlmann and an American partner set up Adanac Foundry Industries Ltd, the Canadian subsidiary of the Carlshütte. Hans Schlothfeldt, the foundry manager at the Carlshütte for many years, took over the operational development of the local plant. Grand-Mère marked the beginning of the globalisation of Ahlmann's ventures, which will also play a big role for ACO: a paradigm is established that laid the foundations the later "ACO worldwide".
The 1950s-style illustration of Severin Ahlmann's numerous overseas travels and activities appeared in April 1954 in "Glück auf", the Carlshütte's in-house magazine. This shows an Ahlmann stove in Canada, radiators and shower trays in the USA. While in Mexico and Brazil, Ahlmann bucket loader are at work, and ships of the Ahlmann fleet are sailing in the Atlantic. In 1954, there were already rudiments of what ACO does today in the Americas. The vision of that time has become a reality.
Death of the heir apparent - birth of a new heir in 1952
On the way back from an inspection trip to the Lürssen shipyard in Bremen, Severin's brother Hans-Julius Ahlmann suffered a serious car accident. He lost control of his car and hit a bridge pillar. In hospital he suffered a pulmonary embolism due to shattered tubular bones. He died on 8 January 1952, one month before his 33rd birthday. The family is totally shocked. Many hopes had been pinned on Käte Ahlmann's eldest son. He was already established as a successor in the Carlshütte company.
Three months later, his widow Juliane gave birth to Hans-Julius' son on 14 April 1952. The son is baptised in his father's name. On 19 April, which has always been celebrated as Foundry Day, the Carlshütte celebrated its 125th anniversary. Severin Ahlmann was now to be appointed as the successor to the family business. Therefore, Käte Ahlmann asked her daughter-in-law, while still in puerperium, to transfer all the new-born’s company shares to Severin. Juliane accepted, and so Josef-Severin Ahlmann entered a new creative phase with extended powers.
Invitation to the funeral service for Hans-Julius Ahlmann on 12 January 1952.
Black sky over the Eider: the anniversary edition of the "Glück auf" magazine, on the occasion of the 125th anniversary of the Carlshütte, was published for Foundry Day in April 1952. The gloomy design of the cover reflects the mourning of the death of Hans-Julius Ahlmann a few months earlier.
.
Käte Ahlmann with her grandson Hans-Julius on the grounds of the Carlshütte.
The further development of the SAB (ACO) company premises
In 1952, Severin Ahlmann acquired a site from the town of Rendsburg, which enabled SAB to expand decisively.
Just a few months after the start of SAB, it had become clear that the company needed more space for manufacturing. In the second half of 1947, Severin Ahlmann leased space from the neighbouring timber trading company H.F. Timm. This was only a sublease, as Timm itself had leased the land from the owner, the town of Rendsburg.
SAB initially acquired land to the east of H.F. Timm on a so-called expansion site. The tracks of the Carlshütte works railway cut through this area on the northern bank of the Eider. Now the SAB site almost completely surrounded the Timm timber business.
Plan on which - in yellow - the expansion of the young company SAB is clearly visible. Outlined in red is the square that is the subject of the trade between the timber merchant Timm and the town. Yellow is the company Severin Ahlmann and purple is the company H.F. Timm. The buildings in detail: 1) Pipe pressing plant, 2) Severin Ahlmann storage yard, 3) Severin Ahlmann storage yard, 4) Severin Ahlmann storage yard, 5) Carlshütte residential building, now Vorwerk office, 6) Thormann hall (built in 1890), 7) Severin Ahlmann office in the Carlshütte, 8) Horse-keeping yard (ca. 1784), 9) Director's house, 10) Concrete moulding, 11) Sanitary moulding, 12) Sanitary grinding, 13) Haus & Hof Ahlmann, 14) Wagenremise (built in 1913), 15) Alte Meierei.
In the spring of 1951, Severin Ahlmann entered into negotiations with the town of Rendsburg to buy the Timm site – the entire plot, not just the subleased part. In the cover letter, the entrepreneur cites SAB's success story and "great initiative". He also emphasised the future importance of the company for the city and the Rendsburg economic area: greater turnover, more jobs, and higher tax payments could only be generated on the basis of the planned expansion.
In March 1952, the efforts were crowned with success: the town sold Severin Ahlmann a total of four parcels of land totalling 4.3 hectares for DM 350,000. Of this, DM 80,000 for the actual plot of land, and DM 260,000 for various buildings, and DM 10,000 costs for miscellaneous inventory. The existing buildings also included the "Thormannhalle".
Aerial view of the Carlshütte and SAB site, 1950s: 1 Director's house, 2 Old dairy, 3 Stables (built in its first form in approx. 1784), 4 Residence, later new Vorwerk office, 5 Carlshütte main office building, 6 Ahlmann house & farm, 7 Coach house (built 1913), 8 Thormann Hall (built 1890), 9 the Carlshütte.
The first Ahlmann swivel bucket loader 1952/53
Intra-plant transport at both the Carlshütte and SAB was to be rationalised. Severin Ahlmann undertook trips to the USA with Carlshütte executives, such as the authorised signatory Friedrich Sensen, and the foundry manager Hans Schlothfeldt, to look into the rational organisation of work processes there. The team became aware of forklift trucks and bucket loaders, some of which were purchased from the importer Stinnes, and used from March 1952.
The staff were sceptical at first: it was not uncommon to hear "Smiet dat Ding in de Eider!" “Chuck that thing in the Eider!”, when the forklift got stuck on the roads, which, at that time, were not very suitable for vehicles of this kind. But that soon changed to "Where's the forklift?" – so two more pieces of equipment had to be purchased.
The idea arose to manufacture bucket loaders at the Carlshütte. One background to the initiative is that the first dead iron from the cupola furnaces could be put to use as the counterweight. It was Hans-Julius who had the initial idea.
Severin Ahlmann now devoted more time to this topic, especially as his authorised signatory Paul Meyer at SAB relieved him of some of the day-to-day management work. In spring 1952, he entrusted the young commercial employee Rolf Schönrock with a market survey, which turned out to be promising. Severin called together a core team for the bucket loader project. It consisted of the naval architect Hans Boll, who had already proved himself in the construction of the Ahlmann ships COLONIA and CIANDRA, the mechanical engineer Mr. Hoffmann, the driver of the shovel loader at the Carlshütte Mr. Reimers, and finally Rolf Schönrock.
In November 1952, the team travelled to Sweden to inspect the all-round bucket loader made by LECAB. This had a bucket that could be swivelled to both sides. Based on the LECAB shovel, three prototypes of their own Ahlmann swivel bucket loader were to be manufactured by the next industrial fair in Hannover in 1953. An ambitious goal, which was achieved despite some setbacks and internal resistance.
Topping-out ceremony for the swivel bucket loader factory building at the Carlshütte in June 1955: Severin Ahlmann addressing the employees.
Glück auf", the Carlshütte employee magazine, reported in detail on the trade fair presentation of the swivel bucket loader in June 1955.
However, the trade fair was not without its mishaps: during the demonstration for a Swiss quarry owner, an hydraulic hose burst. Schönrock quickly distracted the audience, as he himself reported, with "delicacies and alcoholic beverages". Business was done. They generally succeeded in gaining the interest of the public. The first small series production started. The Ahlmann swivel bucket loader began its triumphal procession, and became a synonym for entrepreneurial action, willingness to take risks, the will to diversify, and organisational skills.
AHLMOPLAST - the beginnings of plastics production
Entrepreneurial creativity was also evident when venturing into a completely new material, as was previously the case when the Carlshütte started producing concrete. In 1953, Käte and Severin Ahlmann founded AHLMOPLAST GmbH & Co. KG, which marked the beginning of plastics production in the ACO-Carlshütten cosmos.
It all started with the idea of using glass-fibre reinforced polyester instead of cast iron for the production of bathtubs. However, market demand specifically for bathtubs was still low, so a number of other products were manufactured with the material. These included underwater massage tubs, and modern chairs in the typical style of the time – reminiscent of the designs of Charles and Ray Eames. Light, comfortable and shapely, the seat shells were available in many different colours.
A large order came from the Shell petroleum company: in 1956, the company’s iconic shell emblem made of AHLMOPLAST was presented for the first time. The illuminated logo consisted of two AHLMOPLAST shells illuminated from the inside. Gradually, all large Shell petrol stations were fitted with AHLMOPLAST shells.
The popular seat shells made of AHLMOPLAST, here in the breakfast room of the swivel bucket loader workshop at the Carlshütte. Even today, Ahlmoplast chairs can be found sporadically in Rendsburg and the surrounding area.
.
An underwater massage tub made of Ahlmoplast.
A Shell petrol station in the 1950s: The iconic shell is also made of Ahlmoplast.
AHLMOWELL from Andernach
Plastic production was also started in Andernach. The company produced sheets marketed under the brand name AHLMOWELL, later ACOWELL. As far as is known, this was the first time that the later company abbreviation ACO appears in the form of a brand name.
The AHLMOWELL polyester corrugated sheets produced in Andernach were presented for the first time at the Berlin Industrial Fair in September 1956. They could be produced in many colours, and transparent or opaque, using a manufacturing process developed in-house. They could be used in a variety of ways, e.g., as terrace roofing, windbreaks, or for covered parking areas. For example, they could be found in Rendsburg's open-air swimming pool: a light band made of yellow AHLMOWELL adorned the outdoor pool.
AHLMOWELL at the 1956 industrial exhibition in Berlin.
Contemporary print advertising for the ACOWELL GRP light panels.
Plastic products from Rendsburg and Andernach: AHLMOPLAST and AHLMOWELL.
A light strip made of yellow AHLMOWELL in ##.
The beginnings of concrete window production
In March 1954, SAB closed a licence agreement for the production of concrete window frames with the Hans Bördlein company, a concrete goods factory located in Reith in Unterfranken, Germany. The windows were intended for building construction, mainly for use in agricultural buildings. At the same time, the company developed its own concrete window construction facilities in Rendsburg for industrial and agricultural buildings, as well as for basements in residential buildings. Over the course of 1956, SAB Büdelsdorf began to produce windows according to its own designs. The licence was soon no longer required.
The decision to enter the window manufacturing business proved to be ground-breaking. The production of concrete windows became the company's "bread and butter business" for more than 30 years. Sales volumes were high, and so were the margins.
It was the far-sighted first SAB managing director Paul Meyer who pushed for this new business field. Years later, Severin Ahlmann wrote to him gratefully: "I often look back on the really great decision years ago to include concrete windows in the manufacturing programme. With the SAB proposal at the time, you made a leap in development possible that was of particular importance to us considering our dependency at the Carlshütte on the somewhat unstable cast-iron washing facilities market."
Concrete window construction opened up a line of continuity that is still alive at ACO today with the plastic window segment.
The SAB (ACO) product portfolio in the 1950s
In the mid-1950s, SAB's portfolio comprised three main product segments: the pure concrete products, the sanitary articles made of artificial stone, and the concrete frame windows.
The start with roof tiles, feeding troughs and simple concrete slabs at the end of 1946 was quickly followed by the production of heavy concrete pipes for water management. Even now, they still make up the majority of SAB's concrete products. Rugged pipes ranging from filigree 100 millimetres to massive 1,000 millimetres in diameter are cast as moulded parts. They are mainly used in sewer construction, or for simple water conduits and house connections, and manholes. There are even manhole rings with diameters of up to two metres for this purpose in the range. Cast-concrete road gullies, kerbstones and pavement slabs are used in road construction. In 1954, the signs pointed to an expansion of production: investments were made in an automatic high-performance press for pavement and floor slabs.
Production of paving slabs on modern mixing and pressing equipment.
Kerbstone production.
Medium-diameter civil engineering pipes set up for drying.
For building construction, SAB produced prefabricated parts made of reinforced concrete and artificial stone. These included staircases - as individual steps or complete systems - frames for doors and windows for installation in the façade, as well as window sills. These articles were mainly used in social housing construction. For example, large apartment buildings in Kiel-Wellingdorf were equipped with ready-to-install structural engineering products.
In addition to the series, SAB also produced tailormade items for the construction industry. For bridge construction, for example, these included cover plates made of reinforced concrete, and sleepers. The construction of district heating pipelines required precast ducts. SAB engineers developed customised solutions for such projects.
An example of artificial stone is marble granules. It differs from heavy concrete in the quality and grain fraction of the gravel mix and the aggregates. Grinding and polishing the moulded parts produces an outstanding appearance and attractive surface properties. Sanitary objects primarily involved large washbasins, circular washing fountains or channels. Also sink outlets, rinsing and washing tubs, and foot and shower tubs. Specialities are worktops for ice cream parlours.
Grinding the well-known "Venetia" ice-cream slabs, around 1950.
Winding staircase made of marble granules. A similar staircase is located in the garden house on the grounds of the Carlshütte.
The counterparts to the SAB sanitaryware made of marble granules were provided by the Carlshütte and Ahlmann & Co. Andernach with enamelled cast iron products. The product portfolio of Carlshütte and Ahlmann & Co. Andernach went beyond this. All in all, the three Ahlmann companies offered a diversified range of sanitary and household products. In the 1950s, these could be recognised as branded products because they used the same labels. The products were also presented in a joint catalogue.
Large washing system as in the form of troughs made of marble granules.
Round washing facility made of marble granules.
Basin and tub designs made of marble granules.
-077_-_Kopie.jpg)
-078_-_Kopie.jpg)
SAB, Carlshütte and Ahlmann & Co. in Andernach jointly built up to 100,000 washing units within one year in the 1950s.
Family changes
The Hannover Fair of 1955 was of decisive importance, not only for the success of the swivel bucket loader, but also for the further development of Ahlmann's enterprises. The lady who directed the swivel bucket loader from the upper floor of the trade fair pavilion with her pleasant voice was Maria Jänicke. She was the daughter of a publisher. Josef-Severin Ahlmann fell in love with the attractive and polyglot woman. She became his new partner. In provincial Büdelsdorf, this vision soon caused quite a stir.
Only a few weeks after this encounter - in June 1955 - Severin Ahlmann had a conversation with his mother Käte about the future of the Carlshütte. He probably did not choose his words very carefully, because Käte took it to mean that her son wanted to force her out of the management of the company. She suspected that the initiative for this came not from him but from his new partner. Her relationship with Maria was not on the best footing anyway.
A quarrel ensued, which escalated in February 1956. Käte Ahlmann rescinded the general power of attorney for the Carlshütte granted to her son. Cooperation no longer seemed possible.
In the autumn, Käte proposed a split to her son: Severin should receive the subsidiary in Andernach in exchange for his shares in the Carlshütte. Severin's nephew, the four-year-old Hans-Julius, was now intended as the prospective main heir to the Carlshütte. SAB (ACO) remained unaffected by this arrangement, i.e., continued to be owned by Severin Ahlmann. Severin agreed to the split with a heavy heart.
The editorial article by Severin Ahlmann, which was placed in the press several years after the split, shows how important it was for him to establish an independent identity. Independence is emphasised. The words also make clear how painful the move was for him.
Between Rendsburg and Andernach 1957 to 1968
Reorganisation of the companies
In spring 1957, the family's companies were reorganised according to Käte Ahlmann's proposal. A contract was signed, dated 4 March.
Severin now had three independent companies: Ahlmann & Co. in Andernach, with its focus on cast iron products, SAB in Büdelsdorf for concrete products, and Ahlmoplast GmbH, with its plastic products.
In December of the same year, Severin and Maria Jänicke married in Munich. The couple moved their centre of life to Andernach. In nearby Bad Breisig, they had a house built by architect Paul Wittig.
Paul Meyer's importance in the management of SAB now increased even more, as its owner was rarely seen in Büdelsdorf. This spatial separation between Severin Ahlmann and the place of his birth remained unchanged until his death.
The Ahlmann sketchbook 1957
The ACO archive includes a unique testimony, the so-called Ahlmann Sketchbook from 1957. It gives an overview of Ahlmann's undertakings at that time in a concise and visually appealing manner. Among other things, it explains how a cast-iron bathtub is made, and how it reaches the customer, the development of the swing bucket loader is shown, as well as the rich portfolio of stoves, concrete windows and plastic products.
Probably this prototype company brochure was never published in this form, as the joint Ahlmann company no longer existed after the split between Severin and his mother Käte Ahlmann.
Overview of production in Andernach at the time of the separation of the companies: page from the Ahlmann sketchbook 1957.
The illustration of the production of SAB, page from the Ahlmann sketchbook 1957.
Developments in Andernach
In 1957, Severin Ahlmann and his former co-partner Hans Günter Möller also went their separate ways at AHLMOPLAST. On 30 May 1957, Severin Ahlmann completely took over the company, which had emerged from the plastics division of the Carlshütte. He moved the company headquarters to Andernach.
In Andernach, the plastics division continued to develop very well. At home, the sheets called AHLMOWELL were supplied to building material wholesalers through a network of agents in Germany. Abroad however - instead of exporting the products - the AHLMOPLAST machines required for production, were sold to licensees, together with the necessary know-how for production.
Already in autumn 1958, Severin Ahlmann could move into his new office in Andernach. The spacious new administration building was an impressive advertisement for the polyester light panels produced at the plant, which were installed in the façade. The new building replaced the temporary offices housed in former military barracks. Three ACO covered car parks made of ACOwell were also built around the building.
Rolf Schönrock left the Carlshütte and, after a brief interlude at another company in Berlin, followed Severin Ahlmann to Andernach. He was entrusted with the expansion of the plastics business in Andernach in 1958.
AHLMOPLAST worldwide: Export of plastics know-how
For the distribution of the AHLMOPLAST systems, Schönrock and a patent attorney developed licence agreements, and he had design documents produced which were to be made available to future licensees for repair and maintenance, and he got to know the market and customers.
The acquisition of licensees was initially concentrated on other European countries. Various building material manufacturers were approached, especially manufacturers of asbestos cement, corrugated sheet metal and corrugated aluminium. The contacts to the ETERNIT Group were important here. After presentation trips in Yugoslavia and Japan, the first contracts were signed at the end of 1959. Especially the trip to Japan was an outstanding experience for Rolf Schönrock. He admired the traditions, and was fascinated by the tremendous modernisation of the country.
The final breakthrough for the distribution of AHLMOPLAST machines came in 1960. Further licence agreements were closed with ETERNIT companies in Norway, Denmark, Sweden, Belgium, France, Great Britain and South Africa. In addition, ASSMANN, a metal and plastics processing company in Graz, acquired a plant.
In autumn 1960, Schönrock flew to Moscow with the technical manager of the Andernach plant, Karl Pulch. Behind the Iron Curtain, too, people began to take an interest in AHLMOPLAST. However, the trip did not lead to a business deal – but at least there was plenty of Crimean sparkling wine and caviar.
In 1961, after a return visit by the Japanese to Andernach, a contract was signed. In the same year, two more production lines were sold to Japan. Licence agreements were also signed with customers in Australia, South Africa and New Zealand - following another trip by Schönrock.
To enable the exchange of experience with the first customers, Severin Ahlmann sent out invitations to the first AHLMOPLAST conference scheduled for 17/18 October 1960. In technical presentations, the attendees gained valuable insights and ideas on the raw materials, the production and the application areas of the products.
The format proved so successful, that another, now much larger conference was held in autumn 1962.
Acquisition of Bördlein, and establishment of the new site in Reith
In the course of 1959, Severin Ahlmann acquired the Hans Bördlein concrete products factory in Reith, Unterfranken. The licences for the concrete-framed windows, which had been produced in Rendsburg for five years, came from this company.
Paul Meyer is the driving force behind the takeover of the former licensor. The window business was going well, and was to be further expanded with the new acquisition. From Reith, SAB could also open up new sales markets in southern Germany.
Concrete windows were now manufactured at two locations, while sales were managed centrally from Büdelsdorf. Reith can be regarded as the first location of the later ACO company outside Rendsburg, as Ahlmann & Co. in Andernach was independent and had other production focuses.
Success in Reith
"Install AHLMANN concrete windows ... and never worry about it again." Not only this advertising slogan, but also the products were convincing. From the beginning, the turnover increased continuously, and soon 150,000 units were sold per year. The return was enormous, and the highest of all the product segments in the company. By way of comparison: the processing of 1 kilogramme of window concrete brought in about 90 pfennigs, whereas the processing of 1 kilogramme of heavy concrete for civil engineering in Rendsburg only brought in about 4 to 6 pfennigs.
The new acquisition was the starting point of the strong expansion in this decade: in terms of sales areas, product range and turnover.
Thus it was window production that created the financial basis for Severin Ahlmann's success in the 1960s.
Change of managing director after Paul Meyer's death in 1962
In Rendsburg, Paul Meyer unexpectedly suffered a heart attack in April 1962 and died, not yet 60 years of age. The experienced managing director was not only the creative heart of SAB from the beginning, he was also a friend of the Ahlmann family. His widow, a sister of Friedrich Sensen, one of the directors of the Carlshütte, was initially able to stay on in the house built especially for the Meyer family on the company premises.
In the dynamic phase experienced by the company at that time, a change of managing director was certainly not beneficial. To avoid a management vacuum after Meyer, Rolf Schönrock took over the management in Rendsburg on an interim basis from January 1963. Together with the Rendsburg management, Schönrock was able to secure the positive turnover and profit situation. In March 1964, he returned to Andernach, as he had long been earmarked to take over the management there.
In January 1964, Heinz Rother succeeded him in Rendsburg. His work for ACO, however, remained a relatively brief intermezzo. He was succeeded by Rudolf Kobelt, the former sales representative for concrete windows.
Loading raw segments at SAB in the 1950s. In the background is the historic residence with its characteristic rounded shape. The Vorwerk office was built on this site at the beginning of the 1960s.
The so-called Vorwerk office, on the SAB site, which was first occupied in 1962. With its curved outlines, the building reflects the shape of the previous building on the same site. The name Vorwerk refers to the Vorwerk estate on the banks of the Eider – the former farm attached to the old Rendsburg fortress.
Käte Ahlmann's death in 1963 - the end of an era at the Carlshütte
On 5 June 1963, Käte Ahlmann said goodbye to her grandson and prospective successor, the now eleven-year-old Hans-Julius, at Hamburg Central Station. She traveled to Innsbruck to undergo extensive treatment at the clinic of her son-in-law Prof. Max-Joseph Halhuber. Her heart was weakened. Käte Ahlmann's health had deteriorated more and more over the preceding years, not least because the restless entrepreneur did not take it easy. The treatment was ineffective. Only ten days later, on 15 June 1963, she died in Innsbruck.
Käte Ahlmann with the Minister President of Schleswig-Holstein, Kai-Uwe von Hadsel, at the award of the Grand Cross of Merit of the Order of Merit of the Federal Republic of Germany on 3 October 1960. The picture also shows Dr Marlene Halhuber-Ahlmann; Juliane, now Jebsen; and her son Hans-Julius. Kai-Uwe von Hadsel's connections to the Ahlmann story were manifold. His grandmother was a Thormann, so he came from the family that once owned part of the ACO site. He was also an uncle of Hans-Michael Jebsen, Hans-Julius Ahlmann's half-brother.
Funeral procession for Käte Ahlmann on 21 June 1963 on the Carlshütte site. Eleven-year-old Hans-Julius Ahlmann carries the cushion with the deceased's Federal Cross of Merit. The 3,000 employees of the Carlshütte form a guard of honour. Their long-time confidant Dr Carl Wuppermann speaks at the funeral service. The shadow on the right is cast by the transformer building; the old "sheet metal building" can be seen on the left.
This was not only the end of an era for Carlshütte. The future was also uncertain. In the Christmas edition of the Foundry magazine "Glück auf", published in December 1963 (the first after Käte's death) her daughter Marlene Halhuber-Ahlmann, who now, commuting between Innsbruck and Büdelsdorf, administered the legacy, wrote: "Everyone belonging to the community of foundry people shares our sense of responsibility. Trust me that I take my part as seriously as my mother did, and that I am even more in need of your support!"
The development of cast iron production in Andernach
Cast iron bathtubs remained the most important line of business in Andernach. In 1956, turnover in cast iron bathtubs was DM 10 million, and apart from minor setbacks, it rose steadily over the next few years. In 1968, it amounted to DM 18.2 million. By contrast, turnover in plastic products peaked in 1962 at DM 10.5 million, after which it declined with certain fluctuations.
In 1961, the former foundry manager at the Carlshütte, engineer Karl Pulch, took over the technical management in Andernach. Under his leadership, the automatic enamelling machine was developed in 1962. This technical innovation eased the heavy physical work involved in enamelling the tanks by means of a semi-automatic spreading device with a compressed air sieve. Despite the innovation, and the resulting labour savings, attempts to sell the automatic strewing device abroad failed. In the end, the innovation was only used in the company's own operations.
Hard work on the cupola and electric ovens. ACO Andernach saw itself as the most modern plant for the production of bathtubs in Europe.
Automatic moulding and casting machines for bathtubs, and later also for boilers and customised castings, have been in use at ACO Andernach since 1964.
A few years later, the Carlshütte in turn succeeded in developing an electronically controlled, fully automatic enamelling machine that again reduced the use of personnel for this hard work. Apparently, ACO Andernach and the Carlshütte were engaged in an innovation competition.
The automatic bathtub moulding machine introduced in 1963, on the other hand, proved to be a successful model. In October 1964, ACO Andernach invited the entire German and nearby European wholesale trade to visit the factory.
Over the years, ACO Andernach increased its share of the domestic market, and finally became the market leader for cast iron bathtubs from 1966. Andernach was the first plant to switch completely to titanium enamel, which made a significant contribution to its success. The production facilities for shower trays were also expanded. This investment was completed in 1966, and consolidated the company's pre-eminence in the sanitary sector.
A smaller area of business at the Andernach plant was customised casting, but this remained comparatively small.
At the end of the 1960s, the system of independent sales representatives was disbanded and replaced by ACO sales offices with permanently employed sales staff.
Windows, honeycombs, heavy concrete: Products from Severin Ahlmann Rendsburg in the 1960s
For the Rendsburg site, window production was the most profitable business segment. The product portfolio now included system concrete windows for commercial buildings.
The price lists from 1960 and 1964 show the company's portfolio, and the company's best-seller in the 1960s.
The use of the SAB lettering is remarkable, because the company was already renamed "Severin Ahlmann" in 1951.
The honeycomb windows made of concrete were a special design. Honeycomb windows were reinforced, window fronts with narrow-profiles used in prefabricated construction. They were statically safe, weather-resistant, and required no maintenance. Here, too, the slogan applies: "Install and never worry about it again!" The range was primarily aimed at the industrial sector, and was used, for example, in factories or in the properties of the German armed forces.
A typical example of the use of honeycomb windows in industry: a factory for Mercedes Benz and Auto Union, before the sale of the latter brand to VW in 1964/65.
Ahlmann honeycomb windows in a factory at the Ringsdorff-Werke in Bad Godesberg-Mehlem, one of the world's leading manufacturers of carbon brushes, 1960s.
Honeycomb windows from ACO were of course also used in the new construction of the Vorwerk administration building, seen here in the stairwell.
Another special form was widely used: decorative bricks. They were available in trapezoidal, conical or circular shapes, and were used as façade cladding, or to create ornamental light walls, or as decorative elements for staircases, connecting walls and other representative spaces. They could be glazed or unglazed. Architects were enthusiastic about the diverse design possibilities of decorative stones. Decorative stones were often used in religious buildings. In the course of the 1960s, they became a defining element of contemporary architecture.
A look inside the Kiel University Church reveals the play of colours of the more than 2,000 glazed ACO decorative stones.
In the middle of the decade, the product portfolio of the Rendsburg plant also included the traditional programme of heavy concrete production for the northern German region. Marble granule and artificial stone products were also still on the market. However, both took a back seat to the expanding concrete window business.
The SAB site in the 1960s. Where the concrete windows used to be mass-produced - in the Thormann hall - the public rehearsals of the festival orchestra and the concerts of the Schleswig-Holstein Music Festival take place today - especially in the summer months.
Unusual in appearance and language: Severin Ahlmann's newspaper advertisements from the mid-1960s.
Already present: the ACO logo, but at the time for Rendsburg still in a shade of blue.
In 1966, the company employed about 200 people at its locations in Rendsburg and Reith, generating an annual turnover of about DM 10 million. The number of employees shows how high the proportion of manual work still was at this time. In the same year, Severin Ahlmann's plant in Andernach generated a turnover of DM 25.8 million with about 450 employees.
The first step abroad: Sales of concrete windows in Austria 1964
After the production of concrete windows picked up strongly at the beginning of the 1960s, especially at the still young Reith site, Severin Ahlmann took a forward-looking step: for the first time, a concrete product was to be sold abroad. At the Munich exhibition of the German Agricultural Society in 1963, a special interest in Ahlmann's barn windows was observed among Austrian farmers. The decision was therefore made to supply the Austrian market with concrete windows as well.
A suitable distribution partner was found in Gebr. Assmann & Co. in Leibnitz, Styria. The cooperation was initiated at the beginning of 1964, when the current interim managing director, Rolf Schönrock, contacted the industrialist Dr. Emmerich Assmann. Assmann's Graz plant was already the licensee of an AHLMOPLAST plant. Now the business relationship was to be extended to the window sector. After the customs situation had been clarified, sales in Austria began in the middle of 1964. However, there were no explicit plans for a licence or own production in the neighbouring country. It was rather a question of utilising the capacity of the factory in Reith or expanding there.
Letter from Rolf Schönrock to Emmerich Assmann, in which the first foreign distribution of a Rendsburg product was initiated in February 1964.
PLEASE CLICK TO READ BOTH PAGES!
1965 First use of the ACO logo lettering for Rendsburg
The different names of the individual companies – Severin Ahlmann Rendsburg, Severin Ahlmann Reith, and Ahlmann & Co. Andernach – were confusing and unintuitive for the market. For this reason, the abbreviation ACO for Ahlmann & Co. Andernach was gradually introduced as the brand and logo for all three companies. ACO was to become an unmistakable brand with a strong recognition value.
The old SAB lettering. The abbreviation stands for Severin Ahlmann Beton – the abbreviation was still in use in the 1960s, and had a certain popularity, although the name of the Rendsburg company had already been changed from Severin Ahlmann Beton to Severin Ahlmann, Rendsburg in 1951.
During the 1960s, the abbreviation ACO also became common in Rendsburg, initially still in blue, and often with the small addition SAB.
The further development of plastics production at ACO Andernach
The 1960s were marked by a series of pioneering innovations in the plastics sector at ACO Andernach. In 1965, ACO was the first company on the German market to develop shower partitions, called ACO TRENN. The partitions made of shatterproof fibreglass were in line with the trend for more comfort in the bathroom. A significant increase in sales was achieved here, and by 1974, the company had a market share of 20 percent.
The importance of plastics production was not limited to the Andernach plant. In 1968, process engineer Heinz Dieter Brink from ACO Rendsburg went to Andernach to familiarise himself with plastics. Here he got to know the corrugated polyester sheet production. The connections and communications between Rendsburg and Andernach were lively. Back in Rendsburg, he combined the core competence of concrete in Rendsburg with the plastics competence from Andernach. On this basis, something completely new and innovative was to be created in 1969: the first ACO channel made of polyester concrete.
ACO TRENN in a bright, modern design for more comfort in the bathroom. The rather revealing image appeared in a company brochure in 1974.
Experiments in the plastics sector
In 1958, the then managing director of Ahlmann & Co. Andernach, Mr. Simmat, proposed to produce plastic tiles according to the American model, and to establish them on the German market. The idea was based on the assumption that cumbersome tile removal during bathroom renovations could be avoided by using easy-to-glue plastic tiles. Production was started, and even a mail-order company for plastic articles was founded. Plastic tiles, however, do not go down well in Germany. Consumers stuck to ceramic tiles, and so production was eventually stopped.
The attempt to manufacture sports boats from glass fibre-reinforced plastic, which began in 1966, was also unsuccessful. At the international boat show in Hamburg in 1967, a large houseboat, a sailing catamaran, an open motorboat, a fishing boat, a bathing island, and a jetty were presented.
The idea sounded promising at first: the boats were supposed to be light and cheap to produce. However, the material turned out to be unsuitable. Mr Weber, Severin Ahlmann's driver, got into distress on a test trip, and involuntarily met seals on a sandbank off Sylt before he was rescued. The plastic boats did not have sufficient stability, and production was discontinued. Nevertheless, Severin Ahlmann was still convinced of this project later on. In his autobiography from 1999, he wrote that it was a big and expensive mistake to abandon the leisure catamarans.
Advertising for ACO bathing islands...
...and catamarans.
Start of garage production in Rendsburg in 1968
The end of the 1960s saw a turning point at ACO: heavy concrete production for water management in the Schleswig-Holstein sales region was discontinued in 1968 for reasons of market policy and investment strategy. This marked the end of an important tradition in Rendsburg: the company's history began 20 years earlier with such slabs and pipes.
At the same time, in spring 1968, Severin Ahlmann introduced a new product to the line of concrete articles: garages. Like the original window production in the mid-1950s, this product was not an in-house development by Ahlmann, but was licensed. The licensor of the garage production was J. Kaletka, Ing.-Büro für Bau- und Betriebsplanung, IBK for short, in Gaggenau, Baden.
The concrete system garages were completely prefabricated in the factory, then transported to the customer by truck, and erected on site. These were really large items that ACO now delivered to the licence area, almost all of Schleswig-Holstein, initially with the exception of some regions north of Hamburg.
Garage production flourished, and the product was given the name "ACO Stabil". The ACO garage quickly established itself as a pragmatic and cost-effective solution for parking cars. It was produced in Rendsburg for almost a decade.
Manufacturer's brand with serial number on a system garage, the so-called "ACO-Garage".
Logistics and image of the product, 1970s brochure.
ACO from 1969 – the next steps in the ACO Wiki
Dear Readers,
The ACO story does not end in 1968, of course: it remains exciting right up to the present day. In the coming months, the ACO history wiki will be expanded step by step to include more history and stories from and about ACO.
Enjoy reading, browsing and discovering!
Your ACO Wiki Team
Imprint and Picture Credits
Here you find the imprint and picture credits.
ACO from 1969 – the next steps in the ACO Wiki
Dear Readers,
The ACO story does not end in 1968, of course: it remains exciting right up to the present day. In the coming months, the ACO history wiki will be expanded step by step to include more history and stories from and about ACO.
Enjoy reading, browsing and discovering!
Your ACO Wiki Team
Imprint and Picture Credits
Here you find the imprint and picture credits.
